EDGE2iEDGE3i Manual for Replacing the Y-shaped Filter Screen of an Oil Cooler[Customer Version]1、 Press the machine tool emergency stop switch (any emergency stop switch on the machine tool...

Regarding machine tool alarm 4026:Dielectric liquid cooler alarm, oil cooler alarm: 12 Solution for flow reduction1、 When an alarm occurs, the machine tool and oil cooler are displayed as f...

Wire EDMU3_ U6 alarm 4042Ion bucket inspection for ORION cooler alarm E041、 Machine tool alarm 4042: cooler alarm, ORION cooler alarm: E042、 Open the [Function List] page and turn off [Ion...

UPV-3Lubricant Filling Instructions TSS-01-0019Preface:As the machine tool usage time increases, the performance of the lubricating grease on the surface of the ball screw and linear guide r...

一、Refer to the following figure and click on the marking icon.二、After clicking on the icon, the following image will appear. Click on the detailed settings.三、Refer to the following fig...

1.Create a new folder on the computer's C drive and share it. For example, folder name: TADA2.Open the WFTPD software and make the following settings1)Select all items in the menu shown ...

1. I/0 channel set to 92、Set the IP address as shown in the following figure3、Click on<Hidden Port>again to set the port number (TCP) to 8193 in FOCAS24、Click on the image above<FTP Trans...

Purpose: After the installation of the PRO5 system machine tool, due to the touch screen nature of the PRO5 system, customers sometimes drag and drop files back and forth, delete them, or po...

Step 1: Click on the triangle symbol in the bottom left corner;Step 2: Click the "Maintenance" touch button to enter the maintenance interface;Step 3: Enter the maintenance interface, such a...

How to perform tool change and recover from faults in maintenance modeThere must be some understanding of the "overtravel release or OT RL" button here, and it is necessary to operate withou...